MACH Force-Xp 304 Stainless Steel Axle-Back Exhaust System w/Polished Tips Chevrolet Corvette (C7) 14-19 V8-6.2L LT1
Testing In testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dyno. Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Exhaust Valve: This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active flow management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 4 Carbon Fiber Tips: Finishing off this system are quad light weight, 4 diameter, pure carbon fiber tips. The tips come with CNC-Machined laser-etched inserts, which give an aggressive yet elegant sporty look. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3 mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.
- 100% Hand TIG-Welded 304 Stainless Steel Tubing
- 3 in. To 2.5 in. Mandrel Bent Tubing
- Brushed Finish
- Includes Factory Style NPP Dual Mode And AFM Exhaust Valves
- Utilizes Unique Dual High Flow Stainless Steel Mufflers
- Includes Quad 4 in. Polished Tips w/Laser Etched Inserts
- Uses All Factory Hanger Locations For A Hassle Free Install
Information:
100 Percent Hand TIG-Welded 304 Stainless Steel Tubing; 3 in. to 2-1/2 in. Mandrel Bent Tubing; Brushed Finish; Includes Factory Style NPP Dual Mode And AFM Exhaust Valves; Utilizes Unique Dual High Flow Stainless Steel Mufflers; Includes Quad 4 in. Polished Tips w/Laser Etched Inserts; Uses All Factory Hanger Locations For A Hassle Free Install
Application Summary:
| Year |
Make/Model |
| 2014-2019 |
Chevrolet Corvette |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Clamps Included |
No Clamps Required |
| Country of Origin (Primary) |
US |
| Exhaust Type |
Axle-Back |
| Exit Location |
Rear center |
| Exit Position |
Dual |
| Exit Quantity |
Quad |
| Exit Style |
Straight |
| Finish |
Polished |
| GTIN |
00802959493724 |
| Hanger Included |
Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Horse Power Increase |
7 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
3.000 in. |
| Main Piping Diameter (in.) |
3 |
| Material |
304 Stainless Steel |
| Mounting Bracket Included |
Yes |
| Muffler Count |
2 |
| Muffler Finish |
Brushed |
| Muffler Included |
Yes |
| Muffler Material |
304 Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Pipe Material |
304 Stainless |
| SDR Required Flag |
N |
| Sound Level |
Aggressive |
| System Finish |
Brushed |
| System Material |
304 Stainless Steel |
| System Type |
Axle Back |
| Tail Pipe Material |
Stainless Steel |
| Tail Pipe Quantity |
2 |
| Tip Cut |
Straight |
| Tip Diameter |
4.000 in. |
| Tip Diameter (in.) |
4 |
| Tip Edge Style |
Non-rolled edge, single-wall |
| Tip Finish |
Polished |
| Tip Included |
Yes |
| Tip Material |
304 stainless steel |
| Tip Outlet Size |
4 |
| Tip Quantity |
Four |
| Tip Size |
4.0 in. |
| Torque Increase |
10 |
| Tubing Diameter |
3 to 2-1/2 |
| Warranty Time |
2 |
