1.00 Inch lift
If your car or truck needs a little lift in the front end consider the Mr. Gasket Rubber Coil Spring Spacer. Made from high density rubber, it increases spring height without compromising spring travel. This allows you to raise the front end of your vehicle for clearance, etcetera, and not unduly compromise ride quality. The 1 inch thick spacer provides approximately 1 inch lift. It has a U-shaped groove and a flat top that allows it to be installed at the top of the front coil spring. Dimensions of the spacer are 4 inch i.d. (inner diameter) and 6 inch o.d., (outer diameter) and it can be cut down or expanded for slightly small or larger springs.
If your car or truck needs a little lift in the front end consider the Mr. Gasket Rubber Coil Spring Spacer. Made from high density rubber, it increases spring height without compromising spring travel. This allows you to raise the front end of your vehicle for clearance, etcetera, and not unduly compromise ride quality. The 1 inch thick spacer provides approximately 1 inch lift. It has a U-shaped groove and a flat top that allows it to be installed at the top of the front coil spring. Dimensions of the spacer are 4 inch i.d. (inner diameter) and 6 inch o.d., (outer diameter) and it can be cut down or expanded for slightly small or larger springs.
- Made From High Density Rubber
- Increases Spring Height approximately 1"
- Raises car ride height for additional clearance
- Does not negatively affect ride by limiting spring travel
- Installs above the coil spring
- 4" I.D. 6" O.D.
Information:
Note: The coil spring must be removed from vehicle to install this spacer.| Attributes | |
| ASIN | B000932O6G |
| Brand | Mr. Gasket |
| California Proposition 65 | No |
| Color | Black |
| Country of Origin (Primary) | US |
| Emission Code | 5 |
| Finish | Flat |
| GTIN | 00084041012857 |
| Harmonized Tariff Code (Schedule B) | 8708998180 |
| Hazardous Material Code | N |
| Inside Diameter | 4.000 in., 4 in. |
| Item Weight | 0.940 lbs. |
| Life Cycle Status Code | Available to Order |
| Material | Rubber |
| NAFTA Preference Criterion Code | B |
| Outside Diameter | 6.000 in., 6 in. |
| Product Type | Suspension Components |
| SDR Required Flag | N |
| Warranty | Limited 90 Day Warranty |
| Weight | 0.94, 0.9400 |
Mr. Gasket 1285 RBBR FRONT COIL SPRNG BSTR
Product Information
- Brand: Mr. Gasket
- Product Number: 1285